Gasshåndtak m/ lager

449,-

Slitesterkt og solid gasshåndtak i aluminium, med lager i enden for redusert friksjon. Håndtaket tåler vesentlig mer enn de originale plasthåndtakene. Bildet er et eksempelbilde og kan variere noe i fra aktuell modell.

Clean grip Renthal

129,-

Beskytter holkene når sykkelen ikke er i bruk, tåler høytrykkspyling.

Renthal holker kevlar

199,-

Holker fra markedslederen Renthal, en rekke forskjellige typer og farger: - Kevlar: Den utlimate holken, gir et svært godt og behagelig grep og er veldig slitesterk, leveres i grå/klar farge  

Bremsehendel

129,-

"Jobb mindre, cross mer"  Vi senker prisen på utvalgte slitedeler som kjede og drevsett, bremseklosser, hendler og kjedeføring slik at du kan kjøre mer og jobbe mindre. Smidde bremsehendler som bøyer seg i steden får å knekke, svært god kvalitet og passform.

Clutchhendel

129,-

"Jobb mindre, cross mer"  Vi senker prisen på utvalgte slitedeler som kjede og drevsett, bremseklosser, hendler og kjedeføring slik at du kan kjøre mer og jobbe mindre. Smidde clutchhendler som bøyer seg i steden får å knekke, svært god kvalitet og passform.

Renthal holker taperede dual compound

179,-

Tapered dual compound: samme som dual compound, men med litt større diameter ved tommelen som skrår ned mot resten av holken, gir mer behagelig grep for tommelen, leveres i sort.

Renthal holker dual compound

239,-

- Dual compound: holker med to lag som gjør at de holder lenge selv om de er myke, leveres i sort, blå, orange og rød.

Renthal holker single compound

175,-

Holker fra markedslederen Renthal, en rekke forskjellige typer og farger: - Singel compound soft diamond: lys grå myke holker med prikkemønster - Singel compound medium diamond: grå medium harde holker med prikkemønster - Singel compound medium half vaffel: grå medium harde holker med 50% vaffelmønster.

Hendelsett "flex"

749,-

Sett med flexhendler fra ZAP.

ZAP dual holker

95,-

Dual holker fra ZAP

Cycra ALLOY STEALTH HANDGUARD

549,-

·         Designed to fit any off-road motorcycle ·         Incredibly lightweight and completely adjustable ·         Includes alloy bar mounts ·         Competition-tested by the world's top riders ·         Replacement bracket set also available

Cycra PROBEND CRM RACERPACK

1.799,-

  Ergonomic design allows for sharp turns and easy movement Comes with Cycra Plastic Handshields Quick installation Include bar ends (fits steel and aluminum bars) Racer pack includes shields, side guards, Power Grip bar ends and mounting hardware

Cycra PROBEND CRM ULTRA

2.295,-

Siste håndskyddene fra Cycra. TRADEMARK PROBEND DIP: Probend shape protects & dips at the outside end to allow freedom of mobility for your hands. CENTER REACH MOUNTS [CRM]: Revolutionary designed CRM ULTRA clamps provide maximum bite to secure handguards and allows for superior clearance on a wide range of bars. New updates provide greater allowance for air fork top caps. . PATENTED MOUNTING: CRM bar has a rise bent in to clear cables and hoses. Mounts to the handlebar hard up against the bar clamps where even tapered bars are straight. The clamps are beefy with large Allen bolts and a thick arm rising up to mount the Probend bar. . PATENTED CNC BAR: Machined from 6061 aircraft quality aluminum creating varied bar wall thickness for superior strength and slimmer profile. INDEX BOLT SYSTEM | Offers position options and while keeping the bars tight and secure. Low profile bolt head prevents cable snags. NEW SHIELD DESIGN: The iconic "Cycra Enduro Hand Shield" has undergone a dramatic new design. Featuring a newly reformed ergonomic profile and shape. Enhanced with removable dual zone ventilation system on the top and bottom of shield. Allowing the rider to dial in amounts of ventilation and specific areas of protection. Advanced plastic design and injection molded construction produces a strong, rigid shield balanced with built in in flex zones. . NEW GRINDER DESIGN: Probend Abrasion Guards have undergone a new design of fit and coverage to maximize protection keeping your Ultra Probend CRM bars looking fresh. POWERGRIP BAR ENDS: Slotted barrel allows for firmer bite than ever.

Clutchfeste

149,-

Clutchfeste som passer 09-15 KX450F

Renthal Twinwall 999 (McGrath) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) rødt

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Red UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Neken Fatbar sølv

795,-

28,6 mm fatbar styre fra NEKEN. 7010-T6 aluminum aerospace quality Variable bar made with a variable diameter and wall thickness 1-1/8" diameter in the clamping area 7/8" diameter at the control ends 40% lighter and stronger than a classic bar Laser etched to aid in handlebar centering and indexing Knurled clutch side for better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Fatbar svart

1.095,-

28,6 mm fatbar styre fra NEKEN. 7010-T6 aluminum aerospace quality Variable bar made with a variable diameter and wall thickness 1-1/8" diameter in the clamping area 7/8" diameter at the control ends 40% lighter and stronger than a classic bar Laser etched to aid in handlebar centering and indexing Knurled clutch side for better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Renthal Twinwall 999 (McGrath) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

Renthal Twinwall 998 (Reed/Windham) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 998 (Reed/Windham) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) grønn

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Green UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) rød

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Red UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 923 (RC-mini) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 754 mm (29-3/8") HEIGHT 112 mm (4-7/16") RISE 80 mm (3-1/8") TYPE/BEND Mini| RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 80 mm (3-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 922 (RC-High) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 58 mm (2-9/32") WIDTH 812 mm (32") HEIGHT 12 cm (4-3/4") RISE 86 mm (3-3/8") TYPE/BEND High| RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar

Renthal Twinwall 921 (YZ/YZF 06) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 41 mm (1-5/8") WIDTH 816 mm (32-1/8") HEIGHT 85 mm (3-3/8") RISE 43 mm (1-11/16") TYPE/BEND Twinwall| Yamaha FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 95 mm (3-3/4") PRODUCT NAME Handlebar

Renthal Twinwall 921 (YZ/YZF 06) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 41 mm (1-5/8") WIDTH 816 mm (32-1/8") HEIGHT 85 mm (3-3/8") RISE 43 mm (1-11/16") TYPE/BEND Twinwall| Yamaha FINISH/COLOR Black UNITS Each CLAMPING WIDTH 95 mm (3-3/4") PRODUCT NAME Handlebar

Renthal Twinwall 918 (CR-high) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar

Renthal Twinwall 918 (CR-high) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar

Renthal Twinwall 918 (CR-high) titan

1.395,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar

Renthal FATBAR 36 R-WORKS KTM

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") FEATURES Includes Pad| Smooth, Unknurled RISE 94 mm (3-11/16") TYPE/BEND Fatbar| KTM FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar  

Renthal FATBAR 36 R-WORKS KTM 09-12

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 802 mm (31-9/16") HEIGHT 85 mm (3-3/8") FEATURES Includes Pad| Smooth, Unknurled RISE 81 mm (3-3/16") TYPE/BEND Fatbar| RM| SX FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar

Renthal FATBAR 36 R-WORKS REED

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 807 mm (31-3/4") HEIGHT 93 mm (3-3/8") FEATURES Includes Pad| Smooth, Unknurled RISE 89 mm (3-1/2") TYPE/BEND Fatbar| Reed/Windham FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar

Renthal FATBAR36 R-WORKS RC4/HONDA

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 80 cm (31-1/2") HEIGHT 104 mm (4-1/8") FEATURES Includes Pad| Smooth, Unknurled RISE 10 cm (4") TYPE/BEND CRF| Fatbar| Honda| RC FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar

Renthal Twinwall 999 (McGrath) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

X-TRIG ROCS styrekrone

Renthal Twinwall 997 (RC/CRF 04-18/KXF) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Black UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Viser 1 til 48 (av 66 produkter)