Stempelkitt CR250

1.195,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 66,34 mm B: 66,35 mm

Stempelkitt EXC125

1.495,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 53,95 mm B: 53,96 mm C: 53,97 mm

Stempelkitt FC250

2.995,-

Stempelkitt fra Wiseco HIGH-PERFORMANCE FORGED 4-STROKE PISTONS Dedicated forging Dome design Chrome plated piston pin Dedicated rings Horizontal slot pin oiling Pressure seal groove Lightweight and superior strength Improved flame travel Maximum compression and oil control Smooth edges for improved combustion flow  

Stempelkitt KX125

1.049,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 53,95 mm B: 53,96 mm C: 53,97 mm

Stempelkitt KX250

1.195,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 66,34 mm B: 66,35 mm C: 66,36 mm

Stempelkitt RM125

1.049,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 53,95 mm B: 53,96 mm C: 53,97 mm

Stempelkitt RM250

1.195,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 66,34 mm B: 66,35 mm C: 66,36 mm

FMF Gnarly

4.495,-

FMF GOLD SERIES PIPES The most copied expansion chamber in the world All Gold Series pipes are computer designed and dyno tested to focus power gains where each machine needs it most Every pipe goes through the Tru-Flo stamping process to ensure quality performance and optimum fit Different pipes for selected models allow fine-tuning of a bike’s powerband; Fatty pipes offer better bottom and top power; Gnarly improves low- to midpower with a little less on top than stock    GNARLY™ PIPES Power gains are focused toward bottom and mid, with a goal of increased tractability An excellent off-road pipe, and a winner for tighter tracks Built with tough 18-gauge steel Passer 02-20 YZ250

Krysspinnelager

125,-

Krysspinnelager, vi anbefaler å bytte lager for hvert 2. stempelskifte

Servicesett forgaffel

895,-

Servicesett forgaffel til cross. Inneholder alle o-ringer, skiver, øvre og nedre bussninger samt simmringer og skraperinger til to gaffelbein. Illustrasjonsbilde    

Stempelkitt 85cc Racer Elite, Wiseco

1.395,-

Racer Elite stempel fra Wiseco. The most advanced forged 2-stroke piston available provides premium performance and durability 2000 Series alloy provides extreme strength for extreme conditions ArmorPlating™ for protection from harmful detonation and improved ring seal ArmorFit™ skirt coating for perfect fit and conformability to your cylinder bore Dedicating forging for greater strength and light weight Premium-quality rings enhance sealing for each application Superfinish piston pin reduces friction and smooths operation Based on more than 75 years as the industry performance leader  

Stempelkitt SX250

1.695,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 66,34 mm B: 66,35 mm C: 66,36 mm

Stempelkitt YZ85

1.295,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 47,45 mm B: 47,46 mm  C: 47,47 mm

FMF Gnarly

4.495,-

FMF GOLD SERIES PIPES The most copied expansion chamber in the world All Gold Series pipes are computer designed and dyno tested to focus power gains where each machine needs it most Every pipe goes through the Tru-Flo stamping process to ensure quality performance and optimum fit Different pipes for selected models allow fine-tuning of a bike’s powerband; Fatty pipes offer better bottom and top power; Gnarly improves low- to midpower with a little less on top than stock    GNARLY™ PIPES Power gains are focused toward bottom and mid, with a goal of increased tractability An excellent off-road pipe, and a winner for tighter tracks Built with tough 18-gauge steel Passer 02-20 YZ250

Krysspinnelager

125,-

Krysspinnelager, vi anbefaler å bytte lager for hvert 2. stempelskifte

Krysspinnelager

125,-

Krysspinnelager, vi anbefaler å bytte lager for hvert 2. stempelskifte

Servicekitt forgaffel

1.195,-

Originalt servicekitt fra Showa, se bilde for innhold.

Stempelkitt CRF250R

1.995,-

Stempelkitt fra Wiseco HIGH-PERFORMANCE FORGED 4-STROKE PISTONS Dedicated forging Dome design Chrome plated piston pin Dedicated rings Horizontal slot pin oiling Pressure seal groove Lightweight and superior strength Improved flame travel Maximum compression and oil control Smooth edges for improved combustion flow  

Krysspinnelager

125,-

Krysspinnelager, vi anbefaler å bytte lager for hvert 2. stempelskifte

Stempelkitt KX250F

1.995,-

Stempelkitt fra Wiseco HIGH-PERFORMANCE FORGED 4-STROKE PISTONS Dedicated forging Dome design Chrome plated piston pin Dedicated rings Horizontal slot pin oiling Pressure seal groove Lightweight and superior strength Improved flame travel Maximum compression and oil control Smooth edges for improved combustion flow  

Stempelkitt YZ125

1.495,-

Smidde stempler fra tyske Wossner. Økt effekt og lavere arbeidstemperatur. Materialet har høy tetthet og utvider seg lite, teflonbelagte for mindre friksjon, lettere enn originalstempler som gir raskere respons og høyere effekt. Stempelringer, klips og krysspinne er inkludert. Ikke krysspinnelager.  A: 53,95 mm B: 53,96 mm C: 53,97 mm

Veivlager og simmeringer 85cc

395,-

Veivlager og simmeringer

Fjærsett til gaffel

1.495,-

Vi leverer fjærer fra Hyperpro til det fleste gafler, send en mail med type sykkel, årsmodell og din vekt så sørger vi for at du får rett fjær. Illustrasjonsbilde.

Fjærsett til gaffel

1.875,-

Vi leverer fjærer fra Factory Connection til det fleste gafler, send en mail med type sykkel, årsmodell og din vekt så sørger vi for at du får rett fjær. Sett med fjær(er) foran og bak koster 3000 kr.  Illustrasjonsbilde.

Renthal Twinwall 996 (Stewart/CRF 19->) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Bakfjær

1.295,-

Støtdemperfjær fra Hyperpro, alle fjærstyrker er ikke tilgjengelig til alle sykler. Vi skaffer og styrke opp til 6,7 kg/mm for enkelte modeller.

Renthal Twinwall 996 (Stewart/CRF 19->) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) rødt

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Red UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Komplett veiv YZ125

4.495,-

Komplett veiv fra Wiseco. Kittet inneholder:  Crankshaft kits include crankshaft, top end bearing, premium main bearings and a complete bottom end gasket set that includes all seals and gaskets needed to do the job Only one part number to stock and order Crankshafts are factory assembled and precision trued to OEM specifications Double-forged Wiseco connecting rods maintain superior dimensional consistency through improved grain flow Shot-peening eliminates residual stresses and smoothly blends the rod forging surfaces Corrosion-resistant surface treatment Top and bottom end rod bores case hardened to 58-62 RC to optimize bearing running surface Crank pin bearing radial running clearance is optimized to ensure maximum performance Precision honing ensures ultra round bearing surface Precision-engineered oiling slots maximize rod strength and bearing life Double-drilled small ends provide the piston pin with extra lubrication and cooling, reducing distortion of top end due to thermal transfer from the piston Silver-coated bronze phosphor thrust washers, with dimpled design to increase oil retention and reduce friction between rod and washer interface Crank pin bearings are manufactured from the highest quality hot rolled steel; case-hardened to 58-62 RC Caged needle roller bearings provide the highest possible rpm Precision-machined crank webs Wiseco complete gasket kits are made from premium materials for maximum sealing and reliability; all bearings are OEM-quality for reliability and performance  

Gaffelnøkkel

195,-

Gaffelnøkkel, 47 og 50 mm.

Neken Fatbar sølv

795,-

28,6 mm fatbar styre fra NEKEN. 7010-T6 aluminum aerospace quality Variable bar made with a variable diameter and wall thickness 1-1/8" diameter in the clamping area 7/8" diameter at the control ends 40% lighter and stronger than a classic bar Laser etched to aid in handlebar centering and indexing Knurled clutch side for better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Fatbar svart

1.095,-

28,6 mm fatbar styre fra NEKEN. 7010-T6 aluminum aerospace quality Variable bar made with a variable diameter and wall thickness 1-1/8" diameter in the clamping area 7/8" diameter at the control ends 40% lighter and stronger than a classic bar Laser etched to aid in handlebar centering and indexing Knurled clutch side for better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Renthal Twinwall 999 (McGrath) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

Renthal Twinwall 999 (McGrath) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

Stempelkitt YZ450F 2018->

1.895,-

Smidd stempel, standard kompresjon A stempel: 96,95 mm B stempel 96,96 mm  All pistons are heat treated with a T-5 hardening and tempering cycle All piston skirts are coated with a high-tech Molybdenum Disulphite coating for faster break-in time and increased piston life Cast piston kits are gravity cast aluminum alloy (not forged) with 18% silicone content, which produces an extremely light but very strong piston Forged pistons are forged from 2618 aluminum for superior strength and durability Forged High Compression pistons improve power and torque across entire rpm range Big Bore pistons increase engine’s displacement, torque, and peak horsepower Forged Replica pistons are forged OE replacements Replica pistons and all rings are OEM replacements Kits include piston, rings, wrist pin and circlips Replacement two-stroke piston rings sold individually; four-stroke piston rings sold as a set as needed Top End Kits include Piston Kit and a Top End Gasket Kit, top-end bearing and cam chain.

Renthal Twinwall 998 (Reed/Windham) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Stempelkitt YZ450F 2018->

2.095,-

Smidd stempel, standard kompresjon A stempel: 96,95 mm B stempel 96,96 mm  Manufactured in Japan and designed as OEM replacements Forged genuine pistons are stronger, the alloy is pushed under extreme pressure to a form and the material structure is more dense and can cope with higher pressures Available in standard sizes along with fractional increases in standard sizes Standard B, C and D sizes extend the life of expensive plated cylinders Additional oversizes available in 0,010 increments Pistons supplied in a kit package that includes rings, wrist pins and circlips Pro-X rings and pistons are interchangeable and compatible with OEM pistons and rings Standard size pistons do not require reboring or rehoning your cylinder. Oversize pistons will require reboring and rehoning of your cylinder

Renthal Twinwall 998 (Reed/Windham) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Stempelkitt YZ450F høykomp 2018->

2.195,-

Smidd stempel, høykomp  A stempel: 96,95 mm B stempel: 96,96 mm  Wossner are known worldwide for innovative design and quality manufacture of pistons.  Wossner are the preferred piston for many racing applications with over 25 years in the high performance racing industry. Wossner pistons are forged not cast giving a stronger piston with less impurities in the end result.  Moly coating on the skirts gives less heat transference.  

Renthal Twinwall 997 (RC/CRF 04-18/KXF) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) grønn

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Green UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) rød

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Red UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

ProCircuit 304 lyddemper

2.750,-

ProCircuit 304 Lyddemper The slightly longer body offers added top end performance while reducing noise output Longer body design helps to reduce noise output 6061 T6 brushed aluminum silencer body Stainless steel inlet tube and end-cap Tig and mig welded for strength and durability Double-walled mounting bracket(s) Allen head screws ensure easy repacking when needed for extended product life Made in the USA

Renthal Twinwall 994 (KTM High) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Viser 241 til 288 (av 501 produkter)