Hopp til innhold

Rask levering og gratis retur

MX-deler/tilbehør

Komplett veiv YZ125

4.495,-

Komplett veiv fra Wiseco. Kittet inneholder:  Crankshaft kits include crankshaft, top end bearing, premium main bearings and a complete bottom end gasket set that includes all seals and gaskets needed to do the job Only one part number to stock and order Crankshafts are factory assembled and precision trued to OEM specifications Double-forged Wiseco connecting rods maintain superior dimensional consistency through improved grain flow Shot-peening eliminates residual stresses and smoothly blends the rod forging surfaces Corrosion-resistant surface treatment Top and bottom end rod bores case hardened to 58-62 RC to optimize bearing running surface Crank pin bearing radial running clearance is optimized to ensure maximum performance Precision honing ensures ultra round bearing surface Precision-engineered oiling slots maximize rod strength and bearing life Double-drilled small ends provide the piston pin with extra lubrication and cooling, reducing distortion of top end due to thermal transfer from the piston Silver-coated bronze phosphor thrust washers, with dimpled design to increase oil retention and reduce friction between rod and washer interface Crank pin bearings are manufactured from the highest quality hot rolled steel; case-hardened to 58-62 RC Caged needle roller bearings provide the highest possible rpm Precision-machined crank webs Wiseco complete gasket kits are made from premium materials for maximum sealing and reliability; all bearings are OEM-quality for reliability and performance  
Neken Fatbar sølv

795,-

28,6 mm fatbar styre fra NEKEN. 7010-T6 aluminum aerospace quality Variable bar made with a variable diameter and wall thickness 1-1/8" diameter in the clamping area 7/8" diameter at the control ends 40% lighter and stronger than a classic bar Laser etched to aid in handlebar centering and indexing Knurled clutch side for better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  
Neken Fatbar svart

1.095,-

28,6 mm fatbar styre fra NEKEN. 7010-T6 aluminum aerospace quality Variable bar made with a variable diameter and wall thickness 1-1/8" diameter in the clamping area 7/8" diameter at the control ends 40% lighter and stronger than a classic bar Laser etched to aid in handlebar centering and indexing Knurled clutch side for better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  
Renthal Twinwall 999 (McGrath) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar
Stempelkitt YZ450F 2018->

1.895,-

Smidd stempel, standard kompresjon A stempel: 96,95 mm B stempel 96,96 mm  All pistons are heat treated with a T-5 hardening and tempering cycle All piston skirts are coated with a high-tech Molybdenum Disulphite coating for faster break-in time and increased piston life Cast piston kits are gravity cast aluminum alloy (not forged) with 18% silicone content, which produces an extremely light but very strong piston Forged pistons are forged from 2618 aluminum for superior strength and durability Forged High Compression pistons improve power and torque across entire rpm range Big Bore pistons increase engine’s displacement, torque, and peak horsepower Forged Replica pistons are forged OE replacements Replica pistons and all rings are OEM replacements Kits include piston, rings, wrist pin and circlips Replacement two-stroke piston rings sold individually; four-stroke piston rings sold as a set as needed Top End Kits include Piston Kit and a Top End Gasket Kit, top-end bearing and cam chain.
Renthal Twinwall 998 (Reed/Windham) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Stempelkitt YZ450F 2018->

2.095,-

Smidd stempel, standard kompresjon A stempel: 96,95 mm B stempel 96,96 mm  Manufactured in Japan and designed as OEM replacements Forged genuine pistons are stronger, the alloy is pushed under extreme pressure to a form and the material structure is more dense and can cope with higher pressures Available in standard sizes along with fractional increases in standard sizes Standard B, C and D sizes extend the life of expensive plated cylinders Additional oversizes available in 0,010 increments Pistons supplied in a kit package that includes rings, wrist pins and circlips Pro-X rings and pistons are interchangeable and compatible with OEM pistons and rings Standard size pistons do not require reboring or rehoning your cylinder. Oversize pistons will require reboring and rehoning of your cylinder
Renthal Twinwall 998 (Reed/Windham) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Stempelkitt YZ450F høykomp 2018->

2.195,-

Smidd stempel, høykomp  A stempel: 96,95 mm B stempel: 96,96 mm  Wossner are known worldwide for innovative design and quality manufacture of pistons.  Wossner are the preferred piston for many racing applications with over 25 years in the high performance racing industry. Wossner pistons are forged not cast giving a stronger piston with less impurities in the end result.  Moly coating on the skirts gives less heat transference.  
Renthal Twinwall 997 (RC/CRF 04-18/KXF) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 997 (RC/CRF 04-18/KXF) grønn

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Green UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 997 (RC/CRF 04-18/KXF) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 997 (RC/CRF 04-18/KXF) rød

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Red UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 997 (RC/CRF 04-18/KXF) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
ProCircuit 304 lyddemper

2.750,-

ProCircuit 304 Lyddemper The slightly longer body offers added top end performance while reducing noise output Longer body design helps to reduce noise output 6061 T6 brushed aluminum silencer body Stainless steel inlet tube and end-cap Tig and mig welded for strength and durability Double-walled mounting bracket(s) Allen head screws ensure easy repacking when needed for extended product life Made in the USA
Renthal Twinwall 994 (KTM High) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 994 (KTM High) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 994 (KTM High) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 994 (KTM High) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar
Renthal Twinwall 923 (RC-mini) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 754 mm (29-3/8") HEIGHT 112 mm (4-7/16") RISE 80 mm (3-1/8") TYPE/BEND Mini| RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 80 mm (3-1/8") PRODUCT NAME Handlebar
Renthal Twinwall 922 (RC-High) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 58 mm (2-9/32") WIDTH 812 mm (32") HEIGHT 12 cm (4-3/4") RISE 86 mm (3-3/8") TYPE/BEND High| RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar
Renthal Twinwall 921 (YZ/YZF 06) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 41 mm (1-5/8") WIDTH 816 mm (32-1/8") HEIGHT 85 mm (3-3/8") RISE 43 mm (1-11/16") TYPE/BEND Twinwall| Yamaha FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 95 mm (3-3/4") PRODUCT NAME Handlebar
Renthal Twinwall 921 (YZ/YZF 06) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 41 mm (1-5/8") WIDTH 816 mm (32-1/8") HEIGHT 85 mm (3-3/8") RISE 43 mm (1-11/16") TYPE/BEND Twinwall| Yamaha FINISH/COLOR Black UNITS Each CLAMPING WIDTH 95 mm (3-3/4") PRODUCT NAME Handlebar
Renthal Twinwall 918 (CR-high) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar
Renthal Twinwall 918 (CR-high) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar
Renthal Twinwall 918 (CR-high) titan

1.395,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar
Polisport HANDGUARD HAMMER

295,-

Hammer handguards Hand guard line with 1-point-mount, for MX and Enduro With it comes a new universal mounting system developed for simple and quick installation and a perfect fit on crowded handlebars The HAMMER offers a large plastic shape to protect hands and master cylinder, and 2 positions of horizontal adjustment to allow some level of customization when installed The minimalist design, with horizontal oriented vents and carbon textured plastic cover, will match your bike and give it a stylish look
Renthal FATBAR 36 R-WORKS KTM

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") FEATURES Includes Pad| Smooth, Unknurled RISE 94 mm (3-11/16") TYPE/BEND Fatbar| KTM FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar  
Renthal FATBAR 36 R-WORKS KTM 09-12

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 802 mm (31-9/16") HEIGHT 85 mm (3-3/8") FEATURES Includes Pad| Smooth, Unknurled RISE 81 mm (3-3/16") TYPE/BEND Fatbar| RM| SX FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar
Renthal FATBAR 36 R-WORKS REED

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 807 mm (31-3/4") HEIGHT 93 mm (3-3/8") FEATURES Includes Pad| Smooth, Unknurled RISE 89 mm (3-1/2") TYPE/BEND Fatbar| Reed/Windham FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar
Renthal FATBAR36 R-WORKS RC4/HONDA

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 80 cm (31-1/2") HEIGHT 104 mm (4-1/8") FEATURES Includes Pad| Smooth, Unknurled RISE 10 cm (4") TYPE/BEND CRF| Fatbar| Honda| RC FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar
Toppakningssett 450

749,-

Toppakningssett YZ450F, veg årsmodell Moose can now handle all your gasket and seal needs at a fraction of OEM cost High-tech materials provide unmatched reliability and performance Rebuild the engine and transmission with total confidence as each set is designed for durability and accurate fit Oil seals are genuine OEM replacement seals Performance sets designed for a piston replacement Includes every gasket, O-ring and seal required to rebuild a top end; valve seals, head, base, exhaust, tensioner, and other misc. gaskets and O-rings Does not include formed rubber valve cover gasket Formed valve cover gaskets are included in complete kit with oil seals High-compression kits use .012" thick base gaskets to raise compression Cost-effective way to raise compression without expensive high-compression pistons or cylinder head work All gaskets made in the U.S.A.
Renthal Twinwall 999 (McGrath) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar
Bridgestone X10 100/90-19

1.349,-

Sanddekk fra Bridgestone: X10 100/90-19  Innovative tread patterns developed specifically for deep bottomless sand and mud, maintains control and traction in adverse conditions Operates more effectively over a wider terrain range for greater flexibility in varying track conditions Tube type (TT)
Vannpumpe repkitt YZ125 05-21

295,-

Water Pump Rebuild Kit Include every gasket, O-ring, bearing and seal required to rebuild a water pump Typical kit includes the following: bearings where applicable; rubber seals; mechanical water pump seal where applicable; side cover gasket; water pump gasket; snap rings located on water pump shaft and copper drain washers Passer til 05-21 YZ125
Bridgestone X10 110/90-19

1.495,-

Sanddekk fra Bridgestone: X10 110/90-19  Innovative tread patterns developed specifically for deep bottomless sand and mud, maintains control and traction in adverse conditions Operates more effectively over a wider terrain range for greater flexibility in varying track conditions Tube type (TT)
Bridgestone X10 80/100-21

1.095,-

Sanddekk fra Bridgestone: X10 80/100-21  Innovative tread patterns developed specifically for deep bottomless sand and mud, maintains control and traction in adverse conditions Operates more effectively over a wider terrain range for greater flexibility in varying track conditions Tube type (TT)
MICHELIN SX 5 SOFT 110/90-19

1.195,-

MICHELIN SX 5 SOFT 110/90-19 Maximum traction in soft conditions - Mud-Phobic Bars maximize cleaning capability to prevent mud and dirt from building up between the knobs, which ensures maximum traction and acceleration Maximized feedback at varying lean angles - The intermediate tread blocks on the Soft tire are positioned in staggered rows to maximize traction and feedback throughout varying lean angles High performance in softer terrain - Specifically designed to provide a high level of performance on a wider range of terrain from firm soil, grass, mud, and even sand Specifically designed to provide a high level of performance on a wider range of terrain from firm soil, grass, mud, and even sand Tube type (TT) Blackwall
ProCircuit Platinum 2

4.495,-

Platinum 2 Pipe Offering the same performance gains as our popular Works Pipe, the Platinum 2 Pipe is constructed of heavy-duty 18-gauge metal offering increased protection from rock or crash damage. The Platinum 2 Pipe also utilizes a platinum plating on the body to help protect it from everyday elements making this an ideal pipe for people who race or ride off-road or who ride in extreme weather conditions. Incredible performance with substantial power gains in the low and mid-range part of the powerband will be noticed.  
ProCircuit Works CR500

4.495,-

Works Pipe Offers unparalleled performance, power and torque gains across the entire rpm range. It is constructed of AKDQ high-quality carbon steel, includes an unplated, oiled metal finish to give your bike that "factory look", hand welded and pounded seams and reinforced mounting brackets and stingers for increased durability.   Passer Honda CR500R 89-01
MICHELIN SX 5 SOFT 80/100-21

895,-

MICHELIN SX 5 SOFT 80/100-21 Maximum traction in soft conditions - Mud-Phobic Bars maximize cleaning capability to prevent mud and dirt from building up between the knobs, which ensures maximum traction and acceleration Maximized feedback at varying lean angles - The intermediate tread blocks on the Soft tire are positioned in staggered rows to maximize traction and feedback throughout varying lean angles High performance in softer terrain - Specifically designed to provide a high level of performance on a wider range of terrain from firm soil, grass, mud, and even sand Specifically designed to provide a high level of performance on a wider range of terrain from firm soil, grass, mud, and even sand Tube type (TT) Blackwall
ProCircuit 304 lyddemper CR500

2.750,-

ProCircuit 304 Lyddemper Honda CR 500 91- 01 The slightly longer body offers added top end performance while reducing noise output Longer body design helps to reduce noise output 6061 T6 brushed aluminum silencer body Stainless steel inlet tube and end-cap Tig and mig welded for strength and durability Double-walled mounting bracket(s) Allen head screws ensure easy repacking when needed for extended product life Made in the USA
Toppakningssett 250 cc

315,-

Toppakningssett med topp og bunnpakning, o-ring eksos, pakning innsug og evt til eksosventil Illustrasjonsbilde.
PIRELLI MIDSOFT MX32 80/100-21

995,-

Klassikeren fra Pirelli MX32 MIDSOFT Offers maximum steering precision, especially on softer terrain Mid-shoulder lugs for better traction in softer terrain Excellent durability, with long knob life Soft to mid-hard terrain Tube type (TT)
MICHELIN SX 5 MEDIUM 100/90-19

1.049,-

MICHELIN SX 5 MEDIUM 100/90-19 More lightweight and maneuverable, the new MICHELIN Starcross 5 Medium tire features a combination of technologies. The key point is its carcass, which is considerably more flexible. Its performance on straight stretches and curves is optimized, providing your motorcycle with improved traction and steadier handling around curves High-performance motocross tires designed for mixed to hard terrain - Designed to deliver high levels of performance across the broadest range of conditions and terrain found in motocross and off-road riding Versatile all-day performance - The tire's versatility allows riders to enjoy optimized performance in conditions and terrain that can often change over the course of a day Traction at all lean angles - The intermediate tread blocks are positioned in staggered rows to maximize traction and feedback throughout varying lean angles Designed to give the ultimate performance Tube type (TT) Blackwall
Viser 337 til 384 (av 501 produkter)

GRATIS FRAKT

på bestillinger over 2000 NOK (ikke dekk)

RASK LEVERING

Vi sender med Posten

SIKKER BETALING

med Klarna