Renthal FATBAR 36 R-WORKS KTM

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") FEATURES Includes Pad| Smooth, Unknurled RISE 94 mm (3-11/16") TYPE/BEND Fatbar| KTM FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar  

Renthal FATBAR 36 R-WORKS KTM 09-12

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 802 mm (31-9/16") HEIGHT 85 mm (3-3/8") FEATURES Includes Pad| Smooth, Unknurled RISE 81 mm (3-3/16") TYPE/BEND Fatbar| RM| SX FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar

Renthal FATBAR 36 R-WORKS REED

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 807 mm (31-3/4") HEIGHT 93 mm (3-3/8") FEATURES Includes Pad| Smooth, Unknurled RISE 89 mm (3-1/2") TYPE/BEND Fatbar| Reed/Windham FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar

Renthal FATBAR36 R-WORKS RC4/HONDA

2.495,-

Et helt nytt styre fra Renthal Fatbar®36 Working alongside our factory race teams we developed the concept to improve performance through weight reduction without compromising existing handlebar strength. Every time you accelerate, brake, corner, jump you work against the weight of the motorcycle. By reducing weight it improves the performance of your motorcycle in all of these areas resulting in faster lap times. Renthal has employed its 50+ years of experience in handlebar design, testing and racing to develop the R-Works Fatbar36 the ultimate in lightweight motocross handlebars. Utilising Renthal’s 36Tech™ handlebar standard and proprietary Zarilium® material to give a high strength handlebar at the lowest possible weight. The R-Works Fatbar®36 is 36% lighter than our standard 28mm diameter Fatbar®, previously the lightest motocross handlebar. MATERIAL Zarilium PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 80 cm (31-1/2") HEIGHT 104 mm (4-1/8") FEATURES Includes Pad| Smooth, Unknurled RISE 10 cm (4") TYPE/BEND CRF| Fatbar| Honda| RC FINISH/COLOR Black UNITS Each CLAMPING DIAMETER 36 mm (1-3/8") CONTROLS DIAMETER 22 mm (7/8") PRODUCT NAME Handlebar

Renthal TwinRing

1.595,-

TwinRing® er en kombination av Renthals aluminium ultralight center med en nickelöverdragen yttre stålring. Detta gör att drevet håller lika länge som ett ståldrev men är lättare pga aluminiumet. Den unika flata designen gör att vikten på drevet blir så lätt som möjligt och förebygger trassel med kedjestyraren. För att få den flata designen krymps den yttre stålringen på aluminiumet i ett vågigt mönster och platta skruvar används. Detta betyder att TwinRing® är lika smalt som ett vanligt Renthal drev. TwinRing har testats genomgående av David Knight och KTM World Enduro Team.

Renthal Twinwall 999 (McGrath) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

Renthal holker single compound

175,-

Holker fra markedslederen Renthal, en rekke forskjellige typer og farger: - Singel compound soft diamond: lys grå myke holker med prikkemønster - Singel compound medium diamond: grå medium harde holker med prikkemønster - Singel compound medium half vaffel: grå medium harde holker med 50% vaffelmønster.

Renthal Ultralight bakdrev farget

849,-

Bestselgeren fra Renthal. Renthal Ultralight™ Chainwheels are chosen by more Factory Motocross and Supercross teams than any other brand on the market. Our rear chainwheels are CNC machined to offer the greatest concentricity and optimum tooth profile for increased life and durability. Through the CNC machining process, we are able to create an extremely lightweight rear chainwheel which reduces revolving unsprung weight and increases the power transfer to the rear wheel.

Renthal Twinwall 999 (McGrath) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

Renthal holker dual compound

239,-

- Dual compound: holker med to lag som gjør at de holder lenge selv om de er myke, leveres i sort, blå, orange og rød.

Renthal Twinwall 999 (McGrath) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 813 mm (32") HEIGHT 79 mm (3-1/8") RISE 42 mm (1-5/8") TYPE/BEND McGrath/Short| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 125 mm (4-15/16") PRODUCT NAME Handlebar

Renthal Twinwall 998 (Reed/Windham) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal holker kevlar

199,-

Holker fra markedslederen Renthal, en rekke forskjellige typer og farger: - Kevlar: Den utlimate holken, gir et svært godt og behagelig grep og er veldig slitesterk, leveres i grå/klar farge  

Renthal Twinwall 998 (Reed/Windham) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 56 mm (2-3/16") WIDTH 803 mm (31-5/8") HEIGHT 98 mm (3-7/8") RISE 69 mm (2-23⁄32") TYPE/BEND Reed/Windham| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) grønn

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Green UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Grip donutz Renthal

45,-

Beskytter tommelen slik at du ikke får gnagsår, leveres i rødt, blått og grått.

Renthal Twinwall 997 (RC/CRF 04-18/KXF) rød

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Red UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 997 (RC/CRF 04-18/KXF) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Holkelim Renthal

89,-

Spesiallim fra Renthal, utviklet slik at det limer holken godt uten å skade den.

Clean grip Renthal

129,-

Beskytter holkene når sykkelen ikke er i bruk, tåler høytrykkspyling.

Renthal Twinwall 996 (Stewart/CRF 19->) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) rødt

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Red UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Black UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 996 (Stewart/CRF 19->) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) oransje

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Orange UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 994 (KTM High) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 81 cm (31-7/8") HEIGHT 99 mm (3-7/8") RISE 70 mm (2-3/4") TYPE/BEND KTM High| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Renthal Twinwall 923 (RC-mini) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 40 mm (1-5/8") WIDTH 754 mm (29-3/8") HEIGHT 112 mm (4-7/16") RISE 80 mm (3-1/8") TYPE/BEND Mini| RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 80 mm (3-1/8") PRODUCT NAME Handlebar

Renthal Twinwall 922 (RC-High) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 58 mm (2-9/32") WIDTH 812 mm (32") HEIGHT 12 cm (4-3/4") RISE 86 mm (3-3/8") TYPE/BEND High| RC| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar

Renthal Twinwall 921 (YZ/YZF 06) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 41 mm (1-5/8") WIDTH 816 mm (32-1/8") HEIGHT 85 mm (3-3/8") RISE 43 mm (1-11/16") TYPE/BEND Twinwall| Yamaha FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 95 mm (3-3/4") PRODUCT NAME Handlebar

Renthal Twinwall 921 (YZ/YZF 06) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 41 mm (1-5/8") WIDTH 816 mm (32-1/8") HEIGHT 85 mm (3-3/8") RISE 43 mm (1-11/16") TYPE/BEND Twinwall| Yamaha FINISH/COLOR Black UNITS Each CLAMPING WIDTH 95 mm (3-3/4") PRODUCT NAME Handlebar

Renthal Twinwall 918 (CR-high) blå

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Blue UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar

Renthal Twinwall 918 (CR-high) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Black UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar

Renthal Twinwall 918 (CR-high) titan

1.395,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 65 mm (2-9/16") WIDTH 801 mm (31-1/2") HEIGHT 99 mm (3-7/8") END RISE 70 mm (2-3/4") RISE 67 mm (2-5/8") TYPE/BEND CR| High| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 115 mm (4-1/2") PRODUCT NAME Handlebar