MICHELIN BIBMOUSSE

1.995,-

MICHELIN BIBMOUSSE  Made from a multi-cellular butyl foam material Replaces conventional off-road tubes and provides a pressure equivalent of approximately 13 PSI Specifically designed for off-road competition use, at speeds up to 130 km/h (80 mph)-above this speed, heat buildup can lead to rapid destruction of the Bib Mousse –under no circumstances should Bib Mousse be fitted to motorcycles for on-road use Bib Mousse may be used only with Michelin off-road tires, including StarCross HP4, StarCross MS2, StarCross MH2, S12, M12, H12, Enduro Comp III, EnduroStar, Baja and Desert – because Bib Mousse is shaped for a perfect fit inside these Michelin tires, use of Bib Mousse with other brands of tires can lead to handling instability and possible destruction of the Bib Mousse Each Bib Mousse includes a tube of Bib Mousse Fitting Gel; installer must be sure to follow installation instructions supplied with the product

MITAS TERRA FORCE MX SAND RØD110/90-19

1.049,-

MITAS TERRA FORCE MX SAND RØD110/90-19 Motocross competition tire for extra soft and muddy terrain Red stripe marking

BRIDGESTONE X20 SOFT 120/80-19

1.275,-

BRIDGESTONE X20 120/80-19 Battlecross X20 tires are made for soft terrain Since 2005, Bridgestone has finished on the podium 46 times across all categories of the FIM Motocross World Championships, AMA Pro MX Championships and the JMX Championships Feature blocks molded left to right asymmetrically, providing high stability during both braking and acceleration, with confident cornering grip at all camber angles Battlecross X20 for soft terrain available in one front size and three rear sizes Tube type (TT) M-rated for speeds up to 130 km/h (81 mph)

BRIDGESTONE X31R 110/90-19

1.149,-

BRIDGESTONE X31R 110/90-19 Technology to enhance your performance Improved traction More stability and grip Wider range of use on medium hard surfaces

MITAS MOUSSE STD 0.8/1.0

1.795,-

MITAS MOUSSE STD 0.8/1.0 Mitas mousse was developed to fit perfectly Mitas motocross, enduro, extreme enduro and rally tires. Development and testing were supported by top off-road riders on various types of terrain. Mitas mousse is available in several 18 to 21-inch sizes and three different versions: Standard for all terrain use Soft for hard terrain Extreme for ultra-hard types of terrain.

MITAS TERRA FORCE MX SAND RØD120/80-19

1.095,-

MITAS TERRA FORCE MX SAND RØD 120/80-19 Motocross competition tire for extra soft and muddy terrain Red stripe marking

BRIDGESTONE X20 SOFT 80/100-21

875,-

BRIDGESTONE X20 SOFT 80/100-21 Battlecross X20 tires are made for soft terrain Since 2005, Bridgestone has finished on the podium 46 times across all categories of the FIM Motocross World Championships, AMA Pro MX Championships and the JMX Championships Feature blocks molded left to right asymmetrically, providing high stability during both braking and acceleration, with confident cornering grip at all camber angles Battlecross X20 for soft terrain available in one front size and three rear sizes Tube type (TT) M-rated for speeds up to 130 km/h (81 mph)

BRIDGESTONE X31F 80/100-21

875,-

BRIDGESTONE X31F 80/100-21 Technology to enhance your performance Improved traction More stability and grip Wider range of use on medium hard surfaces

PIGGDEKK-BESKYTTER

795,-

PIGGDEKK-BESKYTTER Metal grommets connect with heavy-duty hooks on the supplied large-diameter elastic cords for easy and secure coverage of the tire Internal elastic cord form fits cover to tire shape to help protect screw heads from losing their competitive edge Keep your ice screws sharp and protect your transporter with the most rugged tire wrap available Durable nylon outer material with PVC inner shell protects while providing long life Flat size: 93-1/2" x 10-1/4" Universal fitment

DEKKBESKYTTER

995,-

Dekkbeskytter Once you are at the starting area you can pull off the wraps, exposing a fresh clean tire to maximize traction for the start of the event Designed to wrap around the tire, then hook-and-loop closure holds the wrap in place over the tire and wheel One size to fit most full-size dirt bike tires (do not use for ice tires to prolong life of tire wraps) Designed to prevent mud from filling in between knobs before the start of each race

MICHELIN SX 5 SOFT 120/80-19

1.249,-

MICHELIN SX 5 SOFT 120/80-19 Maximum traction in soft conditions - Mud-Phobic Bars maximize cleaning capability to prevent mud and dirt from building up between the knobs, which ensures maximum traction and acceleration Maximized feedback at varying lean angles - The intermediate tread blocks on the Soft tire are positioned in staggered rows to maximize traction and feedback throughout varying lean angles High performance in softer terrain - Specifically designed to provide a high level of performance on a wider range of terrain from firm soil, grass, mud, and even sand Specifically designed to provide a high level of performance on a wider range of terrain from firm soil, grass, mud, and even sand Tube type (TT) Blackwall

Metzeler MCE 6 DAYS EXTREME (MEDIUM) 140/80-18

1.595,-

Tillatt brukt på vei 6 Days Extreme Front and Rear Off-Road Tire The ultimate off-road tire developed with World Champion factory enduro riders for the most extreme conditions High Resistance Polyester carcass-material with X-ply construction for superior structural characteristics and excellent puncture resistance Knob distribution and geometry designed to offer outstanding grip and traction with high resistance both in dry and wet conditions, from soft/loose terrains to hard 6 Days Extreme Hard front designed for optimal performance in mid-hard to hard-/rocky terrain; knob design offers consistent contact patch and reduced treat block movement in hard terrain Both front and rear tires are DOT approved Metzeler 6 Day Extreme tires swept the E1, E2 and E3 classes of the 2011 World Enduro Championships M- and R-speed rated Tube type (TT)

Plastkitt 2024 KTM EXC(F)

1.895,-

Plastkitt til 2024 KTM EXC(F)125-450

Lokk bakbrems

125,-

Lokk til bakbremsreservoar i forskjellige farger, eloksert aluminium.

Lokk oljepåfylling

95,-

Eloksert aluminiums lokk til oljepåfyllingen i blå eller rød. NB. CRF250R og CRF450R 09-> med peilepinne

Lufteskrue til Kehinforgasser

149,-

Erstatter den originale luftskruen på Kehin forgasser (som det er umulig å komme til) slik at man kan justere blandingsforholdet i forgasseren på en enkel måte.

Forbremsfeste

95,-

Brakett til feste av forbrems. Med plastforing som gjør at forbremsen vrir seg ved velt. Ny lavere pris.

Justeringsledd for bakbrems

125,-

Justeringsskrue til bakbremspedal i eloksert aluminium.

Dekklåsmutter eloksert

59,-

Hindrer at gjengene på dekklåsen blir fulle av jord/sand. Har i tillegg en skive som er tilpasset slik at trykket fordeles jevnt mot felgen. Prisen er pr stykk, dvs 1 skive og 1 mutter.

Styrekronemutter

79,-

Eloksert aluminiumsmutter som erstatter den orignale styrekronemutteren.

Ventilhetter

35,-

Oppgitt pris er for 2 stk hetter og o-ringer, leveres i rød. Illustrasjonsbilde

Lufttrykkmåler

89,-

Lufttrykkmåler

DUNLOP MX14 120/80-19

1.895,-

DUNLOP MX14 100/90-19 As the successor to the Geomax MX12, the tyre is tailored to the softest sand and mud surfaces in motocross, giving riders optimum grip by using a new pattern with reduced scoop block spacing and 18% taller tread blocks. Developed with top riders in MXGP Taller tread blocks and new rubber compound Improvements for traction, braking and slide control

Renthal Twinwall 997 (RC/CRF 04-18/KXF) titan

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 54 mm (2-1/8") WIDTH 804 mm (31-5/8") HEIGHT 105 mm (4-1/8") RISE 64 mm (2-1/2") TYPE/BEND RC| Twinwall FINISH/COLOR Titan UNITS Each CLAMPING WIDTH 110 mm (4-5/16") PRODUCT NAME Handlebar

Felgringer Excel

1.945,-

Felgringer fra Excel i sølv eller svart. Mange dimensjoner. Noe er bestillingsvare. Finner du ikke din sykkel i oversikten, send oss en mail på info@mxbike.no  

Dekkholder

125,-

Verktøy for å holde dekket på plass ved dekkomlegging.

Renthal Twinwall 996 (Stewart/CRF 19->) svart

1.995,-

Renthal Twinwall cross-styre Twinwall® construction consists of two aluminum alloy tubes, one within the other Outer tube is 7010-T73, which has extreme resistance to mechanical damage and is anodized to prevent corrosion Inner tube is ultra high strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out Laser marked in the middle for accurate positioning Available with anodized finish in your favorite racer's bend Each handlebar includes an updated injection molded foam bar pad for better protection and greater durability Require 1-1/8" bar mounts for bikes originally equipped with 7/8" bars MATERIAL Aluminum PULLBACK/SWEEP 49 mm (1-15/16") WIDTH 811 mm (32") HEIGHT 93 mm (3-3/8") END RISE 50,8 mm (2") RISE 53 mm (2-3/32") TYPE/BEND Twinwall| Villopoto/Stewart FINISH/COLOR Black UNITS Each CLAMPING WIDTH 130 mm (5-1/8") PRODUCT NAME Handlebar

Dual simmerring/skrapering til forgaffel

475,-

SKFs nye dual simmeringer har lavere friksjon enn andre simmerringer, vi har testet dem selv sammen med flere fører og resultatet er overbevisende. Laboratorietester har vist mellom 20-45% lavere friksjon på et krommet gaffelben, på et TiN(Tinalox) behandlet gaffelben er friksjonen opp til 75% lavere. NB! selges i sett med 1 stk skrapering og 1 stk simmering, skal du bytte på begge gaffelbeina trenger du to sett.   Test i MXA

BR9EG

139,-

Tennplugg fra NGK

Neken Twinwall oransje

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall blå

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall svart/hvit

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Ironman bakdrev

1.995,-

Trolig verdens mest slitesterke drev, laget av en utrolig stållegering gjør at du her har et drev med lav vekt og stor styrke. Veier marginalt mer enn et aluminiumsdrev. Kjører du mye er dette en god svært god investering.   NB! vi gir 1 års slitegaranti med fremvisning av kvittering fra MXbike.  

KX85

1.149,-

Komplett plastkitt til KX85

Holkelim Renthal

89,-

Spesiallim fra Renthal, utviklet slik at det limer holken godt uten å skade den.

Neken Twinwall fluo oransje

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall svart/gul

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall lys blå

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall lilla

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall fluo gul

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall grønn

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall Japan

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall USA

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall fluo grønn

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Bremseklosser Moto-Master Nitro sport

245,-

MotoMaster er markedsledende innen bremseteknologi og vi leverer flere forskjellige typer bremseklosser tilpasset mange forskjellige forhold. Klossene er sintrede hvilket gir umiddelbar bremsekraft og god slitestyrke, selv under ekstreme forhold. Klossene gjør det lett å disponere bremsekraften. Klossene trenger minimal innkjøring og fungerer optimalt allerede etter 8 til 10 nedbremsinger. Vi lagerfører følgende klosser: Nitro: En billig og bra bremsekloss som fungerer bra til MX og enduro, god slitestyrke og funksjon i alle typer vær. Nitro sport: Samme som Nitro, men litt mykere, hvilket gir mer bremsekraft og bedre feedback til føreren. Racing: En svært god allround MX konkurransebremsekloss med et høyt effekt/slitestyrke forhold. Racing GP: En kloss som gir 30% mer bremseeffekt enn Racing klossene, tåler svært høye temperaturer og har en umiddelbar svært god bremsekraft

Neken Twinwall factory replica

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Neken Twinwall hvit

1.495,-

28,6 mm konisk fatbar/Twinwall-styre fra NEKEN. 7010 T6 aluminium aerospace quality Oversize NEKEN bar made with a variable diameter and a variable thickness Diameter 28.6 mm in the mounting area Diameter 22.10 mm in the grip area 40% lighter and stronger than a classic bar Laser marking for a better handlebar centering and indexation Knurled clutch side for a better grip hold Bar pad included     A: ende til ende B: senter til senter Beskrivelse Bredde(mm) HøydeA (mm) Sweep A (mm) HøydeB (mm) Sweep B (mm) 85 Lav 754 102 70 75 50 86 Høy 754 139 72 112 52 Original YZF 820 118 74 90 54 Universal høy 815 132 73 105 52 Original RMZ 814 112 76 85 56 Universal lav 820 110 73 80 54 K-BAR 817 112 70 82 52 CR høy 810 125 75 98 56  

Bremseklosser sinter

149,-

"Jobb mindre, cross mer"  Vi senker prisen på utvalgte slitedeler som kjede og drevsett, bremseklosser, hendler og kjedeføring slik at du kan kjøre mer og jobbe mindre. Sinterklosser med god kvalitet til en bra pris. Vi har og klosser til eldre sykler, send oss en mail på info@mxbike.no hvis du ikke finner din sykkel i oversikten.

Viser 385 til 432 (av 500 produkter)